Flat Bars Manufacturers and Suppliers

“Flat Bars are in Flat from and normally we get it in either Cold form or Hot Rolled condition.”

Various Metals of Flat Bars:

We are manufacturer and Suppliers of Stainless Steel Flat Bars. We do stock Stainless Steel Flat Bars in all regular Grades like.................

Alloy Steels Flat Bars.
Duplex Steel Flat Bars.
Nickel Alloys Flat Bars.
Super Alloy Flat Bars.
Copper Flat Bars.
Spring Steel Flat Bars.
Carbon Steel Flat Bars

Process of manufacturing hot Rolled Flat Bars:

Hot rolled flat bars are made out of billets. Billets are being tampered as per the kind of metallic it is and rolled into required size. Normally the length of such flat bars are 5 to 7 meters. These flat bars start from 1 mm to 50 mm thickness.

After rolling because of hot temperature rolling it gets blackish especially in case of stainless steel, if it is mild steel or alloy steel then the finish always being black there is no issue. But in case of stainless steel it should be bright finish that is aluminum finish and that is why mills or traders get these stainless flat bars into acid cleaning and removes complete carbon layer fro these flat bars.

We should mention here that flat bars are available in multiple with as well as exact width, although exact width have some standard size system and those sizes are only available. Such exact sized flat bars are comparatively costlier than normal flat bars.

Grades of Stainless Steel Flat Bars :

There are several grades in stainless steel as following

ASTM A479 304/304L Flat Bars
ASTM A479 316/316L Flat Bars
ASTM A479 321 Flat Bars
ASTM A479 347 Flat Bars
ASTM A479 904L Flat Bars
ASTM A579 316Ti Flat Bars

We can manufacture these flat bars in special size and shape as per customer's specific requirement or as per drawing provided.

Requirement generated for Flat Bars :

| STAINLESS STEEL DRAWN PROFILES & RECTANGULAR FLATS: Material Name : Stainless Steel drawn 'L' Profile & Rectangular Flats. Profile Shape & Size: 1. 'L' profile having size 20 (H) X 12(W) X 3 (Th) mm with corner Radii 0.2mm max. 2. Rectangular Flat to size 20 (H) X 12 (W) mm with corner Radii 0.2mm max. Material Grade: X6CrNiTi18-10 (Material No. 1.4541) Chemical Composition; Cr=17.00-19.00, Ni=9.00-12.00, Ti=5XC%-0.70, C=0.08 max,, Si=1.00 max, Mn=2.00 max, P=0.045 max, S=0.030 max ( in % ) Mechanical Properties (At 23+/-5 degree C): UTS= 500-700 N/mm2 (min), YP (0.2%)= 190 N/MM2 (min), 1% proof strength= 225 N/mm2 (min), Elongation =40% (min), Absorbed Impact Energy = 100 J (min). Delivery Condition: Solution Annealed & Quenched. Note: 1. Transverse cracks, any damage, scale formation, bubbles and inclusion of foreign matter are not permiissible 2. All other detailed technical requirements shall be shared later on. - India |

World Class Third Party Inspection With our World Class Flat Bars Products:

We are suppling to all leading industries :

			Power & Energy Sector
Offshore Industries
	Oil & Gas Industries
Chemical & Pharmaceutical Industries		Ship Building / Marine Industry		Atomic Sector